Manage your device
Everything here lives under My vploq in the app. Renaming, updating, releasing and reporting a device lost are owner-only actions and work on devices you own. A vploq that is shared with you shows its details but tells you it is not yours if you try to change it.
Rename
Names are for you: "Living Room", "Office". Between 1 and 25 characters. Tap the pencil on the name, type, and save; an empty or unchanged name is simply left as it was.
Firmware updates
The device checks in and reports its firmware version. The app shows one of:
| Status | Meaning |
|---|---|
| Up to date | Nothing to do |
| Update available | A newer version exists, shown as current → available |
| Awaiting first check-in | The device has not reported yet; normal right after setup |
| Firmware status unknown | The current version could not be looked up; see troubleshooting |
When an update is available, a New Firmware Available card appears. To install it, press and hold for five seconds. The hold is deliberate: installing firmware restarts the device, which briefly drops any connections through it, so it should not be possible to start one by brushing the screen.
The update is then queued, and your device installs it on its next check-in rather than on the spot. If one is already on its way, the app says so instead of starting a second. An interrupted update is safe: the device keeps running its current firmware and can try again.
If an update does fail, the app shows a notice with a Retry link, and where it can tell why, it names the reason, such as a blocked network or a firewall. Those reasons are listed under troubleshooting.
Sending diagnostics
If support asks for logs, Send diagnostics shares them from the device. It asks you to confirm first, and nothing is sent until you do.
- The logs are retained for up to 30 days, then deleted
- The action is rate limited; if you press it repeatedly the app tells you how many minutes to wait
- Nothing is sent unless you press it and confirm
On a phone, if a device seems unreachable over the network, Scan device status reads its status by holding the phone against it. That is useful when neither end has a working internet connection.
Report a device lost or stolen
If a vploq is lost or stolen, you can block it so it cannot be brought online by anyone else.
Report lost or stolen blocks the device from activating anywhere and cuts its access right away. A red banner then sits at the top of the device, saying it is reported lost and cannot be activated until you restore it, and the device stays in your list so you can undo it.
- I found it — reactivate clears the report and restores access. Only do this if the device is back in your hands.
- Release for resale instead hands it over to a new owner and removes it from your list. You cannot reactivate it here afterwards.
Releasing a device
If you are giving a vploq away or selling it, release it first. Under Ownership, choose Release this device and hold for five seconds to confirm.
Releasing disowns the device on our servers and cuts its access immediately, but it does not erase it remotely. The order matters:
- Release it here first.
- Then press the device's physical reset button to wipe it locally.
Doing it the other way round leaves the device stranded and unable to activate. Once released, the device cannot be claimed by anyone until the next owner activates it under their own account, so until then it works for nobody. Releasing is reversible right up until someone else re-claims the device.
See also Your data.